logo en
Vietnamese   English

Oil Trap Tank


The direct or indirect discharge of oily wastewater which contaminated by mineral oil such as gasoline, diesel, engine oil, fuel oil, etc. into the natural water stream can cause undesirable negative effects of pollution. This problem is exacerbated by rapid urbanization which causes increasing surface flow from paved areas.

The solution is to collect oil pollution at the source by suitable equipment such as oil separator. This device also has an oil sump and is an effective way to remove oil from the drainage system.

Nowadays, oil separator has been installed on over thousands of sites serving a wide variety of facilities around the world. The invaluable experiences are now being utilized in a useful way to provide the best solution to suit local conditions. In this context, we now provide design support services as well as provision, installation, commissioning and after-sales maintenance for your projects.


Oil separators are available as standard parts with a flow rate of 1.5 l / s; 3l / s; 6l / s; 10l / s and 15l / s. On the other hand, on-demand components can reach up to 1500l / s. Parts for underground and ground installation are available.



The oil separator has been proven to operate in thousands of installations around the world with different applications as follows:

- Engine maintenance and repair facility
- Bus station and train station
- Car wash station
- Petrol station
- Parking area
- Storage area
- Airport
- Power plant
- Petrochemical plant
- Plant of cooling and heating area





 Tbitachdau7  Tbitachdau5



The oil separator is ideal for Separation of free hydrocarbons, or for use with weak emulsions. These oil separators are manufactured according to the widely used European standard, EN 858. The specification of the equipment is specifically related to the separation of the oil from the water mixture at a temperature of 20 ° C and 0, 5% hydrocarbons with a density of 0.85 g / cm3


SP Tuyennoi