Machines are like people, when used for too long, they need to be maintained and maintained on time to help machines operate and maintain more stability, especially electrical equipment. The following article provides customers with the maintenance process of industrial electrical cabinets to help readers have the most overview when deciding to maintain the industrial electrical cabinet system of their business.

As we said above, with all types of electrical cabinets in general and industrial electrical cabinets in particular, they need periodic maintenance of electrical cabinets. Depending on the requirements, type or environment of the electrical cabinet, the maintenance and maintenance time of the electrical cabinet may vary. Normally, if the environment in which the electrical cabinet is located is not wet or dusty, the periodic maintenance cycle for the electrical cabinet is usually 4-6 months. If the environment where the cabinet is located is harsh, it is necessary to maintain the electrical cabinet more often to increase the life of the electrical cabinet.

MAINTENANCE PROCEDURES, MAINTENANCE OF ELECTRIC BOX:

STEP 1: PREPARATION TOOLS

• Glove
• Electronic pliers
• Screwdrivers of all kinds
• Normal pliers
• Ammeter
• Flashlight
• Small brush
• Vacuum cleaner

STEP 2: GENERAL CHECK

• Check for damage, rust of electrical cabinets, discoloration in main breaker and busbar
• Check for overheating, noise, unpleasant odors
• Check rain water, external agents such as birds, mice in the cabinet
• Check if the connection cable is broken or disconnected?
• Adjust the “zero” for the meter and the operation characteristics of the regulator relay
• Check the insulation level within the allowed regulations

STEP 3: CLEAN THE ELECTRICAL BOX

• Cleaning and vacuuming the inside of low voltage cabinets
• Treat the rust if present in the cabinet
• Clean the arc extinguishing chamber of the cabinet
• Clean and tighten all connection bolts in the cabinet
• Add grease to moving joints

STEP 4: TEST, CALIBRATE THE EQUIPMENT

• Use specialized equipment to measure insulation resistance, contact resistance of ACB, MCCB, dynamic contactor
• Cold test without load control circuit
• Check operation of Timer and PLC control systems
• Measurement of insulation resistance of low voltage busbar system

Above are the steps in the process of maintaining and maintaining electrical cabinets, if you cannot do it yourself, please contact VESECO. We are a professional consulting, design and installation unit for electrical systems. – automation. We have standardized and monitored every process. Committed to the best quality and durability. Therefore, when cooperating with us, you can be assured of the quality and service of VESACO.

For more information, contact us directly for a consultation and quote.

Head Office – Vietnam Water and Environmental Sanitation Co., Ltd

Address: 2nd Floor, Building D, Viet Duc Complex, Alley 164, Khuat Duy Tien Street, Thanh Xuan District, Hanoi City, Vietnam

Hotline: (+84) 904 571 488.